Forum :: EOSERV :: insoms rev

Soulbanisher posted: (1st Apr 2011 02:43 pm)

Well, I fixed my npcs HP by adding a 0 to the value. Example rat has 10 hp, set to 100 for 10 hp.

So, if i set the npc as type 3, it will abide by my set rules in pub?

Edit: nvm, i just tested the hp, its not 10 hp when you set it to 100 xD but close

sorry :(

if you figure it out, let me know.

Another edit: How do I change where you spawn when you die? I have wanderer and new player spawn in a certain spot, but when you die, you just go to map1 x1 y1. Also, players' home doesn't say wanderer.

This should be in your home.ini
# Innkeeper/spawn point information
#
# Spawn Point Format:
#  name.name = name
#  name.location = map, x,y
#  name.innkeeper = npcid (optional)
#  name.question[1-3] = question (optional)
#  name.answer[1-3] = snswer (optional)
#
# Level Tier Spawn Format:
#  level.x = name
#
# Example:
#  newbland.name = Wanderer
#  newbland.location = 1, 3,4
#  level.0 = newbland
#
# Creates a spawn point at 3,4 on map 1 called Wanderer for vagabonds.
# Questions and answers are only needed if the innkeeper id is set.
#
# It is recommended to create a new file and change the config to point at it
# rather than editing this file.
#
tutorial.name = Wanderer
tutorial.location = 192, 5,6
level.0 = tutorial

main.name = Wanderer
main.location = 2, 13,40
level.1 = main

admin.name = Wanderer
admin.location = 33, 12,4
level.100 = admin

Whitewolf posted: (1st Apr 2011 03:09 pm)

Soulbanisher posted: (1st Apr 2011 02:43 pm)

Well, I fixed my npcs HP by adding a 0 to the value. Example rat has 10 hp, set to 100 for 10 hp.

So, if i set the npc as type 3, it will abide by my set rules in pub?

Edit: nvm, i just tested the hp, its not 10 hp when you set it to 100 xD but close

sorry :(

if you figure it out, let me know.

Another edit: How do I change where you spawn when you die? I have wanderer and new player spawn in a certain spot, but when you die, you just go to map1 x1 y1. Also, players' home doesn't say wanderer.

This should be in your home.ini
# Innkeeper/spawn point information
#
# Spawn Point Format:
#  name.name = name
#  name.location = map, x,y
#  name.innkeeper = npcid (optional)
#  name.question[1-3] = question (optional)
#  name.answer[1-3] = snswer (optional)
#
# Level Tier Spawn Format:
#  level.x = name
#
# Example:
#  newbland.name = Wanderer
#  newbland.location = 1, 3,4
#  level.0 = newbland
#
# Creates a spawn point at 3,4 on map 1 called Wanderer for vagabonds.
# Questions and answers are only needed if the innkeeper id is set.
#
# It is recommended to create a new file and change the config to point at it
# rather than editing this file.
#
tutorial.name = Wanderer
tutorial.location = 192, 5,6
level.0 = tutorial

main.name = Wanderer
main.location = 2, 13,40
level.1 = main

admin.name = Wanderer
admin.location = 33, 12,4
level.100 = admin

My home.ini is far different than that, can I switch it to that one^?

This is mine:

# Innkeeper/spawn point information
#
# Spawn Point Format:
#  name.name = name
#  name.location = map, x,y
#  name.innkeeper = npcid (optional)
#  name.question[1-3] = question (optional)
#  name.answer[1-3] = snswer (optional)
#
# Level Tier Spawn Format:
#  level.x = name
#
# Example:
#  newbland.name = Wanderer
#  newbland.location = 106, 4,6
#  level.0 = newbland
#
# Creates a spawn point at 3,4 on map 1 called Wanderer for vagabonds.
# Questions and answers are only needed if the innkeeper id is set.
#
# It is recommended to create a new file and change the config to point at it
# rather than editing this file.
#

wanderer.name = Wanderer
wanderer.location = 106,4,6


aeven.name = Aeven
aeven.location = 5,5,5
aeven.innkeeper = 150
aeven.question1 = How many houses are on the Aeven map?
aeven.question2 = What is the name of the blue hair guy near Aeven square?
aeven.question3 = How much do flowers cost at the Aeven grocery?
aeven.answer1 = 20
aeven.answer2 = dan
aeven.answer3 = 120


estaq.name = Estaq
estaq.location = 48,39,9
estaq.innkeeper = 156
estaq.question1 = By whom was the Illusion Master named Hitaru cursed?
estaq.question2 = How many axes are to be found on the estaq map?
estaq.question3 = Everyone in estaq have walked over it...
estaq.answer1 = apozen
estaq.answer2 = 6
estaq.answer3 = bridge


anundo.name = Anundo
anundo.location = 161,44,16
anundo.innkeeper = 159
anundo.question1 = What do pandas eat for dinner?
anundo.question2 = Which famous panda rests in Anundo?
anundo.question3 = What does the word 'idaku' mean?
anundo.answer1 = bamboo
anundo.answer2 = pandakopanda
anundo.answer3 = hug


centuar.name = Centuar
centuar.location = 29,23,25
centuar.innkeeper = 160
centuar.question1 = Centuars are half human and half ...
centuar.question2 = What weapon does the weapon smith sell that he can't have smith?
centuar.question3 = How many candles a lighted in the church of Centaur?
centuar.answer1 = horse
centuar.answer2 = book
centuar.answer3 = 4


hallowdale.name = Hallowdale
hallowdale.location = 29,23,25
hallowdale.innkeeper = 160
hallowdale.question1 = Which unique skill can be learned in Hallowdale?
hallowdale.question2 = Which famous person picknicked in our town 1 century ago?
hallowdale.question3 = How many gold spawns in the golden chest in Hallowdale?
hallowdale.answer1 = bard
hallowdale.answer2 = sirhalowdi
hallowdale.answer3 = 34


davolger.name = Davolger
davolger.location = 396,7,22
davolger.innkeeper = 333
davolger.question1 = What monster lives in the swamps of Davolger Davolgar _____ ...
davolger.question2 = What lvl do u need to be to enter davolger ?
davolger.question3 = Before this ? how many questions did i just ask u?
davolger.answer1 = stalker
davolger.answer2 = 5
davolger.answer3 = 2

Replace your wanderer thing with what I put, along with the rest that looks the same.

Does anyone know where the code for promoting an admin would go?

Alot of commands dont work for me :\ does anyone know the possible problem? i did every command once now i cant do them again.

---
stay tuned.

Whitewolf posted: (1st Apr 2011 08:51 pm)

Replace your wanderer thing with what I put, along with the rest that looks the same.

Does anyone know where the code for promoting an admin would go?

I'd say just follow this guide. It's pretty easy and it's a good way to promote someone.  https://eoserv.net/forum/topic/12579

Whitewolf posted: (1st Apr 2011 08:51 pm)

Replace your wanderer thing with what I put, along with the rest that looks the same.

Does anyone know where the code for promoting an admin would go?

I made my home.ini look like you home.ini, but set me map spawns, and you still go to 1 1 1 when you die. Even when you make a new character. And thier home still doesnt say wanderer. :(

insomniac posted: (30th Mar 2011 10:37 pm)

vixen posted: (30th Mar 2011 07:44 pm)

Whitewolf posted: (30th Mar 2011 06:01 am)

vixen posted: (30th Mar 2011 05:41 am)

What do you mean, Ananas?

Ok.. I'll try to explain the database thing..

Download and install mysql if you haven't already.
http://dev.mysql.com/get/Downloads/MySQL-5.1/mysql-5.1.56-win32.msi/from/http://mysql.he.net/

Just keep clicking next til you get to this part of installing it.

Make the password something you can remember, for example... 12341234
If you use that password make sure you don't have Enable root access from remote machines checked.

Now that you've done that. Download and install these..
http://www.vbgore.com/downloads/odbc351.msi
http://www.vbgore.com/downloads/sqlyog603.exe

Once you've installed both of those. Make sure this part of your config looks like this..
### DATABASE ###

## DBType (string)
# Database type (mysql or sqlite)
DBType = mysql

## DBHost (string)
# MySQL hostname / SQLite filename
DBHost = 127.0.0.1

## DBUser (string)
# Database username (MySQL only)
DBUser = root

## DBPass (string)
# Database password (MySQL only)
DBPass = 12341234

## DBName (string)
# Database name (MySQL only)
DBName = twat

## DBPort (number)
# Database port (MySQL only)
# Leave at 0 to use the library default
DBPort = 0

Now open SQLyog and click New Connection.
Name the connection 127.0.0.1
and put in the password 12341234 then click connect.

Right mouse click on the blank white open area on the left side and a menu will pop up.
Choose Restore from SQL Dump...
Then browse for the insoms.sql file inside the TRUNK folder.
Then click execute. Once It's done click OK then close and re-open SQLyog.
Now click the Connect button and on the left side you'll see the database table called Twat.
Open it up by double clicking it. Then open up accounts by double clicking it.
Then select where it says 3 Table Data on the bottom panel of the window.
Select all information in there and press the delete button that looks like a window with a red x on it then click SAVE.
Do the same thing for the information in the characters, guilds and bans areas. Once you've done this you can close SQLyog, now start up your server create your account. Close your client, open back up SQLyog, go into the character areas and set your admin level to 5 and click save.Nowyou'llhavefull access to the server and the features that are usable without having some knowledge on how to run a server. :P Also make sure your port 8078 is forwarded other wise this whole thing was pointless.

I didn't get that part, with the password bit..

@ whitewolve post your Item.cpp if its not fixed.
@ vixen I think what hes sayin is when you set up mysql remember the password you used there because you will use it in the config.ini and heidsql or other database that you use.

I mean't, the part didnt come up.

Soulbanisher posted: (2nd Apr 2011 01:46 am)

Whitewolf posted: (1st Apr 2011 08:51 pm)

Replace your wanderer thing with what I put, along with the rest that looks the same.

Does anyone know where the code for promoting an admin would go?

I made my home.ini look like you home.ini, but set me map spawns, and you still go to 1 1 1 when you die. Even when you make a new character. And thier home still doesnt say wanderer. :(

Well check your config.ini defafult start map, x, y and then check your default map, x, y in your database.

insomniac posted: (30th Mar 2011 04:41 am)

Whitewolf posted: (30th Mar 2011 04:23 am)

Alright I'd rather go with the config part makes it more simple in the long run. Could you give an example of a config file for that? Also what are a list of commands for admin/players, I go into the admin.ini and none of the commands work on either admin level. 0-5. Lemme know, thanks!

Ok the admin $ had a flood rate of like 1 command per minute so I changed it to #.
Remember all pets have to be set to unknown3 or eosep pet 3 in the pub to work correctly, and there should be no unknown3's running wild.
ok world.cpp in the world::world function add
this->pet_config.Read(this->config["PetFile"]);
then in void world::rehash add
this->pet_config.Read(this->config["PetFile"]);
In world.hpp add
Config pet_config;
In your config.ini and local.ini add
## PetFile (string)
# Pet spawn data
PetFile = ./data/pet.ini
then in your data folder add pet.ini  with this format
Allow_Multiple_pets = 0
##this pet system wasnt designed for multiple pets test if you want, Insomniac
Amount = 2

1.Item_ID = 3
1.NPC_ID = 256

2.Item_ID = 4
2.NPC_ID = 5

How do you set a pet to type 3 in pub? I'm trying to change the reaper npc#9 in npc pub edit.

does this have npc's talking in it? oh and uh i can edit this right? its open source?

dijirocks posted: (2nd Apr 2011 09:24 pm)

does this have npc's talking in it? oh and uh i can edit this right? its open source?

yes it's open source.

--- 04/02/11 15:17:21 ---

[WRN] Configuration file not found: 

[ERR] There was a problem trying to make the HTTP request...

That's what happens to me?

Can somone put a guide on how to setup THIS rev!

Click me Insomniac

The purpose of this is specifically for Insom, no one else. Please ignore it.